How Hydro Jet Drain Cleaning Works: A Step-by-Step Guide to Clearing Clogs

Have you ever tried cleaning your drains only for the clog to return in a day or two? While it’s easy to unclog shallow pipes, clearing debris from your main line is a different work. You’ll need a pipe cleaner that is powerful enough to clear even the most stubborn obstructions lingering deep within your plumbing.

The answer? Hydro jetting—a method both powerful and safe for your pipes. This popular drain-cleaning solution leaves pipes spotless, keeping clogs at bay for a long time. Curious to know how this method works? This guide breaks it down for you.

What is Hydro Jetting, and How Does It Work?

Ever notice how your garden hose can strip away dirt on your pavement? By setting its nozzle to high pressure, you can blast away grime sticking to your walls or concrete pathway. Hydrojetting works the same way but on a much stronger level. Around 4,000 PSI, to be specific.

By using high-powered, multidirectional water blasts, a hydro jet slices through debris in your pipes. Not even a wall of invasive tree roots can withstand the powerful stream of water. Its back-facing water jet ensures all the blasted particles are completely pushed out.

In the end, hydrojetting leaves your pipes squeaky clean without damage. It’s like scrubbing the insides of your pipes and restoring their full diameter for optimal water flow.

Benefits of Hydro Jetting Your Drains

When clogs become recurring, hydrojetting becomes the go-to answer for many homes. In fact, it is one of the most popular drain cleaning services Ascent Plumbing, Air Conditioning & Heating offers.

It works so well in delivering these amazing upsides.

• Super Effective and Efficient – The high-pressure water cuts through any clog in seconds. With a single run, the powerful water pressure can dismantle tough blockages like grease, sediments, and even roots. There’s no need for any digging; you just insert the water jet hose and pull it out while it washes away whatever’s sticking to your pipes.
• Deep Cleaning – Unlike drain snakes, it scrubs the entire pipe, not just the blockage. After blasting the debris, it pulls out the dislodged particles, leaving your pipes spotless. This is key to ensuring no organic matter will stick again to your plumbing to cause repeat clogs immediately.
• Affordable Solution – Hydro jetting is no doubt one of the best answers to your stubborn clog problem. Yet this technique isn’t going to stretch your pockets. Hydrojet drain cleaning remains one of the cheapest plumbing solutions you can avail of. On top of its light upfront costs, it also delivers more savings by preventing repairs and damages to your pipes, making it a practical investment in the long run.
• Eco-Friendly – Since hydro jet drain cleaning relies on water, there’s no way to harm the environment. You can use this method as often as you want without contamination or soil pollution.

How Does Hydro Jetting Work?

With its efficiency and effectiveness, you might think that there are a lot of works involving hydrojetting. Well, it’s actually the opposite. The whole process of hydrojetting your pipes is straightforward. There’s no digging up your yard. No chemicals are involved, just the pure power of water.

Here’s how its process goes along:

Step 1: Inspection and Diagnosis

Hydrojetting always starts with a proper inspection. A plumber will use a small drain camera to check for cracks, blockages, or weak spots. This step is important because hydrojetting isn’t safe for damaged pipes. If they find an issue, they’ll suggest a different method.

Step 2: Setting Up the Hydro Jet Machine

Once your pipes pass inspection, the plumber sets up the machine. They connect a hose to the hydro jet pump and adjust the water pressure. The pressure level depends on the type of clog and pipe condition. For example, grease buildup needs lower pressure, while tree roots need higher pressure.

Step 3: Inserting the Hose into the Drain

Next, the plumber feeds the hose into the pipe. They start at the cleanout, which is an access point to your plumbing system. If there’s no cleanout, they might remove a toilet or go through an outdoor drain. The hose is flexible, so it moves easily through the pipes.

Step 4: High-Pressure Water Blast

Here’s where the magic happens. The hydro jet machine blasts water through the nozzle. The nozzle has tiny openings that spray water in different directions. Some jets shoot forward to break up the clog. Others spray backward to push debris out of the pipe. As the hose moves, it scrubs the entire pipe clean.

Step 5: Final Inspection and Testing

After hydrojetting, the plumber does a final check. They may use the camera again to ensure the clog is gone. Then, they run water through the pipes to confirm everything is flowing smoothly. If needed, they adjust the water pressure or go over certain areas again.

Get Fast Hydro Jetting Service with Ascent Plumbing, Air Conditioning & Heating

Dealing with a clogged drain is always a pain and a hassle. But this doesn’t always have to be the case. Investing in regular hydrojetting service takes the struggles away from your hands. With this method, you can rest easy knowing your pipes are protected against recurring and stubborn clogs. Pair with a reliable hydrojetting contractor and experience amazing results the same day.

At Ascent Plumbing, Air Conditioning & Heating, we offer fast and reliable hydro jetting services. You can call us for all types of clogs— from grease buildup to tree root infestation. We’ve been jetting homes for years, so you’re guaranteed to receive only the best results for your plumbing.

Call us today, and let us bring back your pipes to their former glory!